Honeycomb Table *1
Accessories Box*1
Cleaning tools *1
Network Cable 5M *1
Data Cable 3M *1
Hexagon Wrench *1
Air Exhaust Pipe 5M *1
Key Switch *2
Pipe Hoop *2
USB cable mira camera
male on both ends *1
Lens Removal Tool *1
USB Flash Disk *1
Funnel *1
Rail lubricant *1
MIRA dimming target *1
Pipe clamp *1
Ventilation duct flange *1
Timing belt*1Use this text to share information about your product.
1-year warranty on all MIRA S laser machines and parts
6-month warranty on laser tube
FDA Approved & CE CertifiedUse this text to share information about your product.
How Does The Redline Series Achieve 3500mm/s With 8G Acceleration While Maintaining Precision?
Advanced Motion System: High-performance linear guides and motors.
Stability: Robust frame reduces vibrations at high speeds.
Precision Engineering: Ensures flawless laser head movement.
Most lasers use a frame where parts are bolted to a thin shell. For high-speed performance, the frame must be rigid to prevent flexing. The Redline series has a strong frame that stays stable even with the side panel removed, making troubleshooting easier. This rigidity ensures consistent precision at maximum speeds.
Linear guide rails with ball bearings offer greater precision and smoother motion, which improves print quality and longevity. Further, AEON Laser has been conducting rigorous test on all kinds of rails for over 7 years, and selected the most rigid one to meet the requirements for high speed and high precision.
Step into the true closed-loop era with AEON Laser—no more hybrid servos. Our Full AC Servo Motors deliver instant acceleration at 8G of force, achieving top speeds of 4,200 mm/sec on RF models. While other manufacturers may use similar motors, AEON Laser stands out by combining speed, precision, and longevity, a feat few can match.
A lightweight laser head contributes to less over-scanning and an overall reduction in vibration, reducing motor load and significantly enhancing the speed.
The primary objective is to reduce maintenance cycles as much as possible. However, if maintenance is required, AEON ensures it can be done effortlessly through its distinctive features, designed for convenience and efficiency.
Eliminate the hassle of traditional tube replacements and beam alignment. AEON’s innovative laser tube docking station lets you seamlessly swap tubes in and out without the need for tools or calibration the optic path. Say goodbye to painstaking adjustments and hello to effortless precision.
AEON’s mirrors are designed for ultimate convenience, allowing effortless cleaning or replacement without needing tools. Plus, there's no need to re-calibrate after maintenance, ensuring seamless operation and consistent performance.
All Redline Series feature a magnetic lens carriage, making lens maintenance a breeze. The focal lens is secured with a press-fit silicone washer, allowing users to easily clean or swap lenses for various tasks without complications.
AEON’s philosophy of effortless serviceability is embodied in its modular design. Most components are engineered for rapid removal and replacement, featuring quick connectors for maximum convenience. From chillers to sensors and motors, any issues can be resolved swiftly. Simply submit a ticket, and our service team will ensure prompt delivery of the required parts, making replacements straightforward—even for beginners.
We focus on more than just a robust structure or rigid components; we go the extra mile to ensure enduring, issue-free performance. Every AEON machine is meticulously designed to deliver lasting reliability, with unwavering performance at the core of its engineering.
The Super Clean Pack design goes beyond the basics, enclosing the linear rails and bearing blocks for added protection. Additionally, protective curtains on the left and right side rails prevent unwanted particles from spreading beyond the work area, significantly prolonging the lifespan of the rails and greatly enhancing cutting and engraving quality.
Each Redline series is equipped with a bullseye leveling gauge, making it easy to ensure your laser is perfectly level—a critical detail often overlooked by engineers. Proper leveling is essential; without it, axles experience increased friction and distortion, significantly shortening the lifespan of the rails.
AEON's engineering team has incorporated mechanical microswitches in the Redline series, replacing the previous photoelectric limit sensors. These microswitches are built to last, offering over 200,000 cycles of flawless operation, ensuring exceptional reliability and performance.
AEON Laser takes every measure to protect your equipment and enhance its longevity. Our engineers have enclosed the laser path in durable aluminum tubes, providing a robust barrier against dust and debris. Additionally, we’ve incorporated protective lenses for the mirrors to further safeguard the optical components. This design significantly reduces the frequency of maintenance, ensuring a longer lifespan for your laser tubes, mirrors, and lenses.
Whether you're upgrading from a hobby laser or starting fresh, AEON's intuitive, user-friendly interface ensures smooth operation and a quick learning curve. Our streamlined workflow allows you to get up and running effortlessly, making it easier than ever to harness the full potential of your laser system.
If space is of concern, you’ll be pleased to know that Aeon is the first in the laser industry to offer an all-in-one solution comprised of an integrated water cooling system, exhaust fan, and air assist pump so that no extra space is needed for ancillary components ,minimize the footprint of the machine and make your workspace neat and more organized.
The Aeon Laser logo on the front access door panel is now backlit and doubles as a functional Status Light, illuminating white when in standby, red when an error is encountered, and green while in operation, adding both form and function to an already stunning design.
The already well-lit work area just got brighter with the addition of 2 more LED lights on the underside of the MIRA lid, just behind the handle. When the lid is opened, the 2 interior LEDs turn off and the overhead lights turn on to illuminate your work area, while loading material and using the camera. There is even a dimmer knob on the side of the machine for setting the mood just right.
| Parameter | Mira 5S servo | Mira 7S servo | Mira 9S servo |
|---|---|---|---|
| X&Y Axis Working Area | 500 × 300 mm | 700 × 500 mm | 900 × 600 mm |
| Z Axis Lifting Space | 140 mm | 140 mm | 150 mm |
| Machine Dimension (mm) | 900 × 700 × 410 | 1128 × 945 × 510 | 1328 × 1070 × 530 |
| Parameter | Mira 5S servo | Mira 7S servo | Mira 9S servo |
|---|---|---|---|
| RF Metal Tube | 30W / 60W | 30W / 60W | 30W / 60W |
| Parameter | Mira 5S servo | Mira 7S servo | Mira 9S servo |
|---|---|---|---|
| Max. Engraving Speed | RF tube: 3500 mm/s | RF tube: 4000 mm/s | RF tube: 4000 mm/s |
| Max Acceleration Speed | 8G | 8G | 8G |
| Minimum Font Size (RF tube) | 1.0 × 1.0 mm | 1.0 × 1.0 mm | 1.0 × 1.0 mm |
| Max. Lifting Capacity | 15 kg | 25 kg | 25 kg |
| Water Chiller | External | External | External |
| Fume Exhaust Fan | Built-in inline 60W | Built-in inline 75W | Built-in inline 75W |
| Air Assist | Built-in 45W | Built-in 85W | Built-in 85W |
| Item | Mira 5S servo | Mira 7S servo | Mira 9S servo |
|---|---|---|---|
| XY Axis Fully Dust-Proof Design | ✓ | ✓ | ✓ |
| AutoFocus | ✓ | ✓ | ✓ |
| WiFi Data Transfer | ✓ | ✓ | ✓ |
| Red Dot Positioning | ✓ | ✓ | ✓ |
| Material Pass Through Door | ✓ | ✓ | ✓ |
| Solenoid Valve | ✓ | ✓ | ✓ |
| Snap-on & off Lens Mount | ✓ | ✓ | ✓ |
| Internal Memory | 1G | 1G | 1G |
| Lid Material | Polycarbonate | Polycarbonate | Polycarbonate |
| Item | Mira 5S servo | Mira 7S servo | Mira 9S servo |
|---|---|---|---|
| Air Flow through Honeycomb | ✓ | ✓ | ✓ |
| Knife table | ✓ | ✓ | ✓ |
| Honeycomb table | ✓ | ✓ | ✓ |
| Material Collection Tray | ✕ | ✕ | ✕ |
| Control Panel | Keypad & LCD display | Keypad & LCD display | Keypad & LCD display |
| Item | Mira 5S servo | Mira 7S servo | Mira 9S servo |
|---|---|---|---|
| RDWorks Software | ✓ | ✓ | ✓ |
| LightBurn Software | Optional | Optional | Optional |
| Compatible Operating Systems | Windows & Mac (LightBurn) | Windows & Mac (LightBurn) | Windows & Mac (LightBurn) |
| Compatible Software | CorelDRAW / Illustrator / AutoCAD | CorelDRAW / Illustrator / AutoCAD | CorelDRAW / Illustrator / AutoCAD |
| Item | Mira 5S servo | Mira 7S servo | Mira 9S servo |
|---|---|---|---|
| Smart Panel (monitoring) | ✕ | ✓ | ✓ |
| Fault alarm and diagnosis | ✕ | ✓ | ✓ |
| Operation status light | ✓ | ✓ | ✓ |
| Item | Mira 5S servo | Mira 7S servo | Mira 9S servo |
|---|---|---|---|
| 1.5" Lens | Optional (with lens slot) | Optional (with lens slot) | Optional (with lens slot) |
| 2.0" Lens | Standard | Standard | Standard |
| 2.5" Lens | ✕ | ✕ | ✕ |
| 4.0" Lens | ✓ | ✓ | ✓ |
| Reflect mirror | 3 × φ25 | 3 × φ25 | 3 × φ25 |
| Beam combiner | φ25 × 1 | φ25 × 1 | φ25 × 1 |
| Protective mirror | φ20 × 1 | φ20 × 1 | φ20 × 1 |
| Item | Mira 5S servo | Mira 7S servo | Mira 9S servo |
|---|---|---|---|
| Safety Level | Class 1 | Class 1 | Class 1 |
| Lid interlock | ✓ | ✓ | ✓ |
| Side-plate interlock | ✓ | ✓ | ✓ |
| Water flow protection | ✓ | ✓ | ✓ |
| Water temperature alarm | ✕ | ✕ | ✕ |
| Item | Mira 5S servo | Mira 7S servo | Mira 9S servo |
|---|---|---|---|
| Voltage | 110V / 220V | 110V / 220V | 110V / 220V |
| Rated Power | 60W RF: 1650W 30W RF: 1400W |
60W RF: 1900W 30W RF: 1600W |
60W RF: 1900W 30W RF: 1600W |
| Item | Mira 5S servo | Mira 7S servo | Mira 9S servo |
|---|---|---|---|
| Package Size | 990 × 790 × 600 mm | 1250 × 1080 × 710 mm | 1430 × 1170 × 740 mm |
| Net Weight (N.W.) | 100 kg | 180 kg | 220 kg |
| Packed Weight (G.W.) | 125 kg | 230 kg | 290 kg |
| Item | Mira 5S servo | Mira 7S servo | Mira 9S servo |
|---|---|---|---|
| Support Table | ✓ | ✓ | ✓ |
| Rotary | ✓ | ✓ | ✓ |
| Camera | ✓ | ✓ | ✓ |
| Air Filter | ✓ | ✓ | ✓ |
Note: Specifications may vary depending on configuration. Please contact us to confirm final specs.
